ASAAdvanced
Filalab ASA 1.75mm 0.85KG Black
Only 5 left
ASA made in Lithuania for outdoor use — will not yellow in the sun.
Compatibility and preparation
What do these mean?Hardened nozzleNot required
Enclosed printerRequired
Heated chamberNot required
Drying 65 °C · 6–12 hRecommended
Use an enclosed printer.
Recommended settings
Nozzle240–280°C (Bambu Lab: 270°C)
Bed90°C
Speed40–250 mm/s
Only 5 left
Recommended settings
Nozzle240–280°C (Bambu Lab: 270°C)
Bed90°C
Speed40–250 mm/s
Print settings
Nozzle240–280°C (Bambu Lab: 270°C)
Bed90°C
Speed40–250 mm/s
Cooling10–35%
Diameter1.75 mm
Spool weight0.85kg/spool
DifficultyAdvanced
Printer requirements
Hardened nozzle
Not required
Enclosed printer
Required
Heated chamber
Not required
Drying
Recommended
Drying and storage
Filalab ASA 1.75mm 0.85KG Black — colour: Black.
ASA is the weatherproof cousin of ABS. Same strength and heat resistance, but UV will not turn it yellow or brittle — this is the material that stays outdoors for years.
Filalab manufactures in Lithuania. A short supply chain means fresh material and consistent quality from batch to batch.
Best for
- Garden lights, signs and letterboxes
- Car exterior parts and covers
- Anything that sits in the sun
Worth knowing
Like ABS, ASA shrinks as it cools and needs a draught-free environment. It gives off fumes while printing — ventilate the room.
Exact print settings, drying recommendation and printer requirements are in the specification table above.
Related products
Out of stock
Out of stock
Eesti
Latviešu