TPUIntermediate

Prof. Lab TPU 95A 1.75mm 1kg Yellow

Name: Prof. Lab TPU 95A 1.75mm 1kg Yellow
Brand: Prof. Lab
SKU: FG-P125-E1
Price: 14.90 EUR
Availability: InStock

Only 4 left

Flexible TPU 95A with good elasticity, tear resistance and impact resistance.

Compatibility and preparation

What do these mean?

Hardened nozzleNot required

Enclosed printerRecommended

Heated chamberNot required

Drying 60°C · 1 hRequired

Use a direct-drive extruder with a short filament path and a low print speed.

Recommended settings

Nozzle205–235°C

Bed50–60°C

Speed30–70 mm/s

Only 4 left

Recommended settings

Nozzle205–235°C

Bed50–60°C

Speed30–70 mm/s

SKU: FG-P125-E1 Category: TPU Tags: 3d Filament, 3d filament, 3D material, 3D printer material, 3D printing material, filament, flexible filament, material, Prof. Lab, tpu filament, tpu material Brand: Prof. Lab

Print settings

Nozzle205–235°C

Bed50–60°C

Speed30–70 mm/s

Cooling0–50%

Diameter1.75 mm

Spool weight1kg/spool

DifficultyIntermediate

Printer requirements

Hardened nozzle Not required

Enclosed printer Recommended

Heated chamber Not required

Drying Required

Drying and storage

DryingRequired

Temperature60°C

Time1 h

Use a direct-drive extruder with a short filament path and a low print speed.

Tensile strengthASTM D638, 50 mm/min 21.7 MPa

Elongation at breakASTM D638, 50 mm/min 536 %

Flexural strengthASTM 790, 2 mm/min (as published) 4.26 MPa

Flexural modulusASTM D790, 2 mm/min 87.6 MPa

Manufacturer laboratory material data. Final part properties depend on print settings, part geometry and the test method.

Source: Professional Lab TPU 95A Technical Data Sheet, Supplied 2026

Prof. Lab TPU 95A 1.75mm 1kg Yellow — colour: yellow.

Prof. Lab TPU 95A is a flexible and elastic filament that returns to its original shape after bending. It offers good tear and impact resistance, making it suitable for parts that must flex repeatedly or absorb impacts.

Its Shore 95A hardness provides a practical balance between flexibility and printability.

Suitable for

Protective cases and impact-absorbing parts
Seals, feet and cushioning parts
Flexible joints and straps
Wearable and ergonomic components

Good to know

TPU prints most reliably with a direct-drive extruder and a short filament path. Start with a lower speed and moderate cooling, and avoid excessive retraction.

TPU absorbs moisture quickly. Dry the filament before printing and store opened spools in an airtight container with desiccant.

The exact printing parameters, drying recommendations and printer requirements are listed in the specification table above.

Prof. Lab TPU 95A 1.75mm 1kg Yellow

Compatibility and preparation

Recommended settings