eSun PVA 1.75mm 0.5kg Natural filament
Only 4 left
Dissolves in water — support material for complex shapes.
Compatibility and preparation
What do these mean?Väga niiskustundlik — hoia alati suletud karbis.
Recommended settings
Only 4 left
Recommended settings
Print settings
Printer requirements
Drying and storage
Manufacturer laboratory material data. Final part properties depend on print settings, part geometry and the test method.
Source: PVA Technical Data Sheet, Nov.2021, Version 4.0
eSun PVA 1.75mm 0.5kg Natural filament — colour: Natural.
Water-soluble support material. Print supports with a second extruder and simply dissolve them away afterwards — it makes shapes possible that otherwise would not be.
eSun has been making 3D printing materials since 2007 and is now one of the largest manufacturers in the world — which means consistent quality between batches and a wide colour range.
Best for
- Internal cavities and channels
- Complex overhangs
- Moving assemblies printed in one go
Worth knowing
PVA is the most moisture sensitive material in the range — humidity alone turns it sticky and unprintable. Always store the spool sealed with desiccant.
Exact print settings, drying recommendation and printer requirements are in the specification table above.
Related products
Eesti