eSun ePLA+HS 1.75mm 1kg Purple - Image 2

eSun ePLA+HS 1.75mm 1kg Purple - Image 3

PLAIntermediate

eSun ePLA+HS 1.75mm 1kg Purple

Name: eSun ePLA+HS 1.75mm 1kg Purple
SKU: ePLA+HS -P175Z1
Price: 21.91 EUR
Availability: InStock

Only 9 left

PLA built for fast printing that stays accurate at high speed.

Compatibility and preparation

What do these mean?

Hardened nozzleNot required

Enclosed printerNot required

Heated chamberNot required

Drying 45 °C · 6 hRecommended

Dry the filament if it is brittle or the spool has been open for a long time.

Recommended settings

Nozzle210–230°C

Bed45–60°C

Speed50–350 mm/s

Only 9 left

Recommended settings

Nozzle210–230°C

Bed45–60°C

Speed50–350 mm/s

SKU: ePLA+HS -P175Z1 Categories: ePLA+HS, PLA Tags: 3d filament, 3d Filament, 3D material, 3D printer material, 3D printing material, beginner-friendly, epla+hs, esun, filament, high speed pla, material, pla+

Print settings

Nozzle210–230°C

Bed45–60°C

Speed50–350 mm/s

Cooling100% (full cooling)

Diameter1.75 mm

Spool weight1kg/spool

DifficultyIntermediate

Printer requirements

Hardened nozzle Not required

Enclosed printer Not required

Heated chamber Not required

Drying Recommended

Drying and storage

DryingRecommended

Temperature45 °C

Time6 h

Dry the filament if it is brittle or the spool has been open for a long time.

Tensile strength 53.12 MPa

Elongation at break 4.01 %

Flexural strength 83 MPa

Flexural modulus 2900 MPa

Notched Izod impact strength 5.6 kJ/m²

Manufacturer laboratory material data. Final part properties depend on print settings, part geometry and the test method.

Source: eSUN Material Parameter Comparison, Accessed 2026-08-02

eSun ePLA+HS 1.75mm 1kg Purple — colour: Purple.

PLA engineered for fast printing. It melts evenly even when far more material passes through the nozzle than usual. Made for CoreXY and other fast machines.

eSun has been making 3D printing materials since 2007 and is now one of the largest manufacturers in the world — which means consistent quality between batches and a wide colour range.

Best for

Large parts that would otherwise take all night
Small batches and repeat parts
Prototypes where speed matters

Worth knowing

To use the speed you need a high-flow hotend. On a slower printer it behaves like ordinary PLA — no worse, but no gain either.

Exact print settings, drying recommendation and printer requirements are in the specification table above.

eSun ePLA+HS 1.75mm 1kg Purple

Compatibility and preparation

Recommended settings