3DPower Hyper PA6 1.75mm 0.5KG Natural - Image 2

PAAdvanced

3DPower Hyper PA6 1.75mm 0.5KG Natural

Name: 3DPower Hyper PA6 1.75mm 0.5KG Natural
SKU: 3DPWR_HYPER_PA6_NATURAL
Price: 28.99 EUR
Availability: InStock

In stock · 10 pcs

Strong nylon for gears and wear-resistant parts.

Compatibility and preparation

What do these mean?

Hardened nozzleNot required

Enclosed printerRequired

Heated chamberRequired

Drying 60–70 °C · 12–24 hRequired

Prindi kohe pärast kuivatamist, hoia rulli kuivatuskapis.

Recommended settings

Nozzle230–270°C

Bed60–90°C

Speed40–300 mm/s

In stock · 10 pcs

Recommended settings

Nozzle230–270°C

Bed60–90°C

Speed40–300 mm/s

SKU: 3DPWR_HYPER_PA6_NATURAL Category: PA Tags: 3d Filament, 3d filament, 3D material, 3d printer, 3D printer material, 3d printing, 3D printing material, 3DPower, cost-effective, filament, flexible, heat-resistant, material

Print settings

Nozzle230–270°C

Bed60–90°C

Speed40–300 mm/s

Cooling0–20%

Diameter1.75 mm

Spool weight0.5kg/spool

DifficultyAdvanced

Printer requirements

Hardened nozzle Not required

Enclosed printer Required

Heated chamber Required

Drying Required

Drying and storage

DryingRequired

Temperature60–70 °C

Time12–24 h

Prindi kohe pärast kuivatamist, hoia rulli kuivatuskapis.

Tensile strengthISO 527-1/-2 51 MPa

Elongation at breakISO 527-1/-3 1.8 %

Flexural strengthISO 178 111 MPa

Flexural modulusISO 178 2837 MPa

Manufacturer laboratory material data. Final part properties depend on print settings, part geometry and the test method.

Source: 3DPower Hyper PA6 Technical Data Sheet, Updated 2022-03-06

3DPower Hyper PA6 1.75mm 0.5KG Natural — colour: Natural.

Nylon is the engineering material for parts that move and wear. It is tough, slippery and durable — where PLA would snap and PETG would wear, nylon keeps going.

3DPower focuses on value for money and provides ready-made slicer profiles for its materials.

Best for

Gears, rollers and bearing seats
Hinges and clips that need to flex
Industrial wear parts

Worth knowing

Nylon absorbs moisture faster than any other filament — a few hours in open air is enough to make prints porous and weak. Print straight after drying and keep the spool in a dry box. Finished parts absorb moisture too and grow softer and tougher over time.

Exact print settings, drying recommendation and printer requirements are in the specification table above.

3DPower Hyper PA6 1.75mm 0.5KG Natural

Compatibility and preparation

Recommended settings