3DPower Elasti TPU 90A 1.75mm 0.5KG Grey
In stock · 11 pcs
Flexible TPU, slightly firmer and therefore easier to print.
Compatibility and preparation
What do these mean?Use a direct-drive extruder with a short filament path and a low print speed.
Recommended settings
In stock · 11 pcs
Recommended settings
Print settings
Printer requirements
Drying and storage
Manufacturer laboratory material data. Final part properties depend on print settings, part geometry and the test method.
Source: 3DPower Elasti TPU 90A Technical Data Sheet, Updated 2023-10-26
3DPower Elasti TPU 90A 1.75mm 0.5KG Grey — colour: Grey.
A flexible material that behaves like rubber: it stretches, compresses and springs back. Wear resistance is better than most rigid plastics.
3DPower focuses on value for money and provides ready-made slicer profiles for its materials.
Best for
- Seals, bushings and dampers
- Phone cases and protectors
- Wheels, belts and grips
Worth knowing
Flexible filament does not feed well through a long bowden tube — a direct drive extruder gives the best result. Print slowly and turn retraction almost off, or the filament will coil inside the extruder.
Exact print settings, drying recommendation and printer requirements are in the specification table above.
Related products
Eesti
Latviešu