Prof. Lab PETG 1.75mm 1kg White
In stock · 20 pcs
Strong, chemical-resistant filament with good layer adhesion for functional parts.
Compatibility and preparation
What do these mean?Dry the filament if it is brittle or the spool has been open for a long time.
Recommended settings
In stock · 20 pcs
Recommended settings
Print settings
Use these values as a starting point and prefer the manufacturer’s specific profile.
Printer requirements
Before purchasing, check that the printer and preparation meet all four requirements.
Prof. Lab PETG 1.75mm 1kg White — colour: white.
Prof. Lab PETG is a durable 3D printing filament with good layer adhesion, chemical resistance and dimensional stability. It is well suited to parts that need more toughness and heat resistance than PLA can provide.
PETG prints consistently and works well for both everyday functional parts and technical prototypes.
Suitable for
- Enclosures, holders and organisers
- Functional parts and prototypes
- Parts exposed to moderate heat or chemicals
- Strong everyday objects
Good to know
Excessive cooling can reduce PETG’s interlayer adhesion. Start with the manufacturer’s recommended settings and adjust cooling to suit the geometry of the part.
Moisture in the filament can cause stringing, bubbling and uneven extrusion. Store opened spools in a sealed container with desiccant and dry the filament before printing when necessary.
The exact printing parameters, drying recommendations and printer requirements are listed in the specification table above.
Related products
Eesti