Filalab PLA Basic 1.75mm 1KG Grey
Out of stock
PLA made in Lithuania — consistent colour and accurate diameter.
Compatibility and preparation
What do these mean?Dry the filament if it is brittle or the spool has been open for a long time.
Recommended settings
Out of stock
Teavita kui toode on laos tagasi
Recommended settings
Print settings
Printer requirements
Drying and storage
Manufacturer laboratory material data. Final part properties depend on print settings, part geometry and the test method.
Source: Filalab PLA Technical Data Sheet (identified by user as PLA Basic), Last available user-supplied link; currently returns 404
Filalab PLA Basic 1.75mm 1KG Grey — colour: Grey.
PLA is the easiest 3D printing material there is and the best place to start. It does not shrink as it cools, sticks to the bed without tricks, and gives a clean surface even on a budget printer.
Filalab manufactures in Lithuania. A short supply chain means fresh material and consistent quality from batch to batch.
Best for
- Prototypes, models and mock-ups
- Decorations, toys and gifts
- Holders, boxes and drawer dividers
Worth knowing
PLA starts to soften just above 60 °C, so it is not the material for a car in summer or for parts left in direct sun. Use PETG or ASA for those.
Exact print settings, drying recommendation and printer requirements are in the specification table above.
Related products
Eesti
Latviešu