Prof. Lab TPU 95A 1.75mm 1kg Red
Only 5 left
Flexible TPU 95A with good elasticity, tear resistance and impact resistance.
Compatibility and preparation
What do these mean?Use a direct-drive extruder with a short filament path and a low print speed.
Recommended settings
Only 5 left
Recommended settings
Print settings
Use these values as a starting point and prefer the manufacturer’s specific profile.
Printer requirements
Before purchasing, check that the printer and preparation meet all four requirements.
Prof. Lab TPU 95A 1.75mm 1kg Red — colour: red.
Prof. Lab TPU 95A is a flexible and elastic filament that returns to its original shape after bending. It offers good tear and impact resistance, making it suitable for parts that must flex repeatedly or absorb impacts.
Its Shore 95A hardness provides a practical balance between flexibility and printability.
Suitable for
- Protective cases and impact-absorbing parts
- Seals, feet and cushioning parts
- Flexible joints and straps
- Wearable and ergonomic components
Good to know
TPU prints most reliably with a direct-drive extruder and a short filament path. Start with a lower speed and moderate cooling, and avoid excessive retraction.
TPU absorbs moisture quickly. Dry the filament before printing and store opened spools in an airtight container with desiccant.
The exact printing parameters, drying recommendations and printer requirements are listed in the specification table above.
Related products
Eesti