Prof. Lab PA12 1.75mm 1kg Black

Name: Prof. Lab PA12 1.75mm 1kg Black
Brand: Prof. Lab
SKU: FG-P207-E1
Price: 49.90 EUR
Availability: InStock

Only 5 left

Tough, wear-resistant PA12 nylon with low moisture absorption and good dimensional stability.

Compatibility and preparation

What do these mean?

Hardened nozzleNot required

Enclosed printerRecommended

Heated chamberNot required

Drying 70°C · 4–6 hRequired

Print immediately after drying.

Recommended settings

Nozzle260–290°C

Bed70–90°C

Speed40–100 mm/s

Only 5 left

Recommended settings

Nozzle260–290°C

Bed70–90°C

Speed40–100 mm/s

SKU: FG-P207-E1 Category: PA Tags: 3d filament, 3d Filament, 3D material, 3D printer material, 3D printing material, filament, material Brand: Prof. Lab

Print settings

Use these values as a starting point and prefer the manufacturer’s specific profile.

Nozzle temperature260–290°C

Bed temperature70–90°C

Recommended speed40–100 mm/s

Cooling0% (off)

Diameter1.75 mm

Spool weight1kg/spool

DifficultyAdvanced

Drying and storage

Correct preparation helps prevent moisture-related weak layers, uneven surfaces and stringing.

DryingRequired

Temperature70°C

Time4–6 h

Practical note: Print immediately after drying.

Printer requirements

Before purchasing, check that the printer and preparation meet all four requirements.

Hardened nozzleNot required

Enclosed printerRecommended

Heated chamberNot required

DryingRequired

Prof. Lab PA12 1.75mm 1kg Black — colour: black.

Prof. Lab PA12 is an engineering-grade nylon filament with good toughness, wear resistance and fatigue resistance, together with lower moisture absorption than many other nylons. It maintains dimensions well and suits parts exposed to repeated movement or loads.

PA12 combines durability, dimensional stability and low friction, making it a practical choice for engineering components.

Suitable for

Gears, bushings and moving joints
Fasteners and load-bearing parts
Functional prototypes
Parts exposed to wear and repeated flexing

Good to know

PA12 requires an all-metal hot end capable of reaching 290 °C. For larger parts, an enclosed printer helps reduce drafts and improve dimensional stability.

Although PA12 absorbs less moisture than many other nylons, it should still be dried before printing and stored in a sealed container with desiccant.

The exact printing parameters, drying recommendations and printer requirements are listed in the specification table above.